Posts

Ice Melt 101: What you need to know about ice melt

When used correctly, ice melt is a powerful tool that can help keep ice from forming and reduce the risk of slips and falls.

Keep these key points in mind when using ice melt:

  • Ice-melt compounds are only effective down to a specific temperature
  • The temperature of the air, pavement, and the type of ice-melt compound used will affect the rate at which snow and ice meltsslick-sidewalk

Knowing what to use

It’s important that your organization assess your needs for application of ice-melt compounds.

Consider:

  • Where around your facility to use ice melt
  • Whether the area has access to traffic and sunlight, which affects the overall effectiveness of ice-melt compounds
  • All the methods for treating areas
  • Cost

What’s the science behind ice melt?

Ice-melting compounds lower the freezing point of water. These products attract moisture to themselves to form a liquid brine solution, which can generate heat and melt the ice. The amount of ice that is melted by a given quantity of ice-melt compound will decrease as the temperature of the mixture is lowered. As the ice melts, the compound solution’s concentration is reduced and the freezing point of the water starts to increase until such time that more ice-melt compound is spread on the ice and water.

The lowest melting point of the water and ice-melt compound solution is termed the “eutectic” temperature. At this limiting eutectic temperature, solutions of the ice-melt compound aren’t effective and the melting action on the ice will cease.

The quantity of ice-melt compound needed to lower the freezing point of ice to the eutectic temperature is called the “eutectic concentration.” At this lowest temperature, the rate at which ice melts is very slow. When this melting action slows, adding more compound has no impact on lowering the eutectic temperature, thus, the ice melts no faster.

salt-vs-snow

Tips for using ice melt

  • Do not use on concrete less than two years old. Freeze-thaw damage may occur.
  • Know what product to use by understanding its composition and lowest surface temperature at which it remains effective. Use an infrared heat gun to determine the surface temperature.
  • Apply in advance of a winter storm. Early attention before a storm will help prevent the formation of ice. When snow starts falling, the ice melt will create a brine solution, helping to prevent ice from bonding to the surface.
  • Disperse ice melt properly. Contrary to popular opinion, using large amounts of ice melt does not affect the speed which ice and snow melts. Using too much product can damage surfaces and harm the environment.
  • Use a mechanical spreader for accurate coverage. The proper coverage rate is about one cup per square yard. This coverage will fan out and undercut the ice, so that you can shovel the walkway clear.
  • Continue to disperse ice melt during a storm.  This helps to prevent snow from becoming hard-packed on surfaces.

Ice melt plays an essential role in many winter safety programs. Select the right ice melt and apply correctly to reduce the chance for slips and falls this winter.

Contact Kissner Group Inc. today for all of your Ice Melter needs.

32 Cherry Blossom Road, Cambridge, ON  N3H 4R7.

Phone: 1-800-434-8248 | Fax: 1-877-434-8250.

Email: info@kissner.com

Website: www.kissner.com

Organize Your Snow Removal Plan

Established over 130 years ago, Kissner has evolved to become a trusted market leader in both the rock and blended salt industry. We are known for providing reliable service to an impressive list of clientele throughout North America. We have the experience and resources to be your top supplier.

 

Call Toll Free 1 (800) 434-8248. Local Call (519) 279-4860

 

With the forecast prediction of accumulating snow in North America, it is time to organize your snow removal plan.

 

Some Important Tips for Proper Snow and Ice Management:

 

  1. Remember that most cities have snow removal bylaws governing snow clearing timelines for your walkways/parking lots.

 

  1. Slips on ice can cause serious injuries. Be sure to clear ice from your residence or business walkways. If you cannot clear the ice then be sure to add a salt mix to avoid liability concerns.

22f9e71a21f2ba7b5e380c80eba8be00

  1. Snow removal can be dangerous, especially for the elderly or people with health conditions. Most communities have snow removal programs that can assist in snow removal for those who cannot do it themselves.

 

  1. If you have a flat roof or a commercial roof, be sure to clear the snow off these surfaces, as the amount of snow after storms can become extremely dangerous. It is prudent to remove it as soon as possible after each major event. Also, remember that roof snow removal can be dangerous so use a professional.

 

  1. Falling ice from a roof can be very dangerous. Be sure to hire a professional company to remove the ice from roof edges where the public may get hurt. Snow guards are helpful and should be installed if no guards are currently installed on the roof.

snow

  1. Snowplow equipment can also be dangerous. Please allow adequate room for snow equipment on city streets and highways to do their jobs.

 


Contact Kissner Group Inc. today for all of your Ice Melter needs…

32 Cherry Blossom Road, Cambridge, ON  N3H 4R7

Phone: 1-800-434-8248 | Fax: 1-877-434-8250

Email: info@kissner.com

Website: www.kissner.com

 

Preparing Your Landscape for Winter

Old Man Winter will quickly be upon us and there are a few things you can do to prepare your landscape before the first frosts and snow:

SIP944640.jpg.rendition.largest.ss

Mulch Plants If Needed

Many homeowners think of mulching in the spring but winter mulching can be very helpful to your plants.  If you notice areas around where mulch has been removed, cover them back up.  Mulch will help protect any exposed roots from the winter weather.

 

 

 

MPC107762.jpg.rendition.largest.ssRemove Leaves From Your Lawn and Gutters

Piles of leaves left in lawn areas can cause unsightly brown spots and dead areas in the spring.  If leaves get in your gutters it may cause ice build up and damage to your drain systems and gutters.

 

 

 

 

100032054.jpg.rendition.largest.ssWinterize Your Irrigation System

Use a professional service to drain your irrigation lines of water for the winter.  If your back flow and lines are not properly drained of water they could freeze and cause unknown issues in the spring.

 

 

 

 

BKS010532.jpg.rendition.largest.ss

Protect Your Plants

Winter weather can be damaging to some plants.  Protect your plants using pine needles or protective fabric.  Leaves piled up around shrubs like hydrangeas and roses can also help protect soft tissue from the cold winter.  Some salt and ice melts can also be harmful to many plants.  Be careful where you apply ice melting chemicals and try using a protective fence around plants that may come in contact with salt. Kissner offers a line of ice melts that are less harmful to plants and vegetation. Check out www.kissner.com

 

 

BKS029561.jpg.rendition.largest.ssPrune Dormant Plants

Ice and snow build up on plants can cause damage to plants.  Make sure to prune out weakened and overlapping branches to deter any unnecessary damage.

 

 

 

 

 


Contact Kissner Group Inc. today for all of your Ice Melter needs.

32 Cherry Blossom Road, Cambridge, ON  N3H 4R7.

Phone: 1-800-434-8248 | Fax: 1-877-434-8250.

Email: info@kissner.com

Website: www.kissner.com

 

Winter is quickly approaching, are you ready for another round?

Be prepared this winter and save money and time with an effective ice melt! Keep your walkways safe this season with an ice melt that can’t be “BEET.” The Kissner Group has created a product that will outperform other leading brands by melting ice in even the extreme cold temperatures.

“We conducted a survey with a group of our customers to find out what they wanted in an ice melt and we received some interesting results,” said Tim Orleman, Executive VP of Kissner Group Inc.

Tim Orleman adds.

“We have already experienced a great deal of success with our customers by providing them with premium ice melt formulations. Our research is now revealing that our customers are interested in an ice melt that offer organic options and work in severe winter conditions and still preserve the surroundings.”

The Executive VP of Kissner Group explains.

“We realized we could serve a segment of the market that is requesting an organic and effective ice melter as well as provide them with an ice melter that will work in even the coldest conditions.”

It’s the best of both worlds, and a win, win situation for everyone.

The Kissner Group’s newest Ice Melter provides a blend of the latest ice melt innovations. Meet: The Ice Beeter™! This product is specially formulated with Beet Extract Solution. During extreme winters, salt alone just doesn’t cut it. Beet juice has become a very popular snow and ice-melting tool due to its sticky properties and organic goods.

How does Ice Beeter™ work? Tim Orleman explains the process of the Ice Beeter™.

“Our process begins with the extraction of the sugar particles from a sugar beet, leaving the molasses syrup. The organic solution is then infused with salt crystals, enabling the formulation to work at chilling temperatures.”

Tim Orleman further explains.

“Not only does Ice Beeter beat ice, it is less wasteful because it is made from a waste product that would normally be discarded into landfill. We listened when our customers requested a safer product, and by utilizing the beet vegetable it is as organic as it can get. “

Ice Beeter™ is triple-screened to provide uniform spreading with maximum results. It is color coated to ensure visible complete coverage. This helps reduce waste and prevents over-spreading, which can be harmful to vegetation and is also less binding to carpet fibers, resists tracking therefore reducing costly clean ups.

The Kissner Group takes pride in providing the highest-quality products and has further enhanced its ability to keep customers supplied at all times.” So this winter when nothing else works ask for Ice Beeter™.

 

Ice Beeter

Ice Beeter

 

Contact Kissner Group Inc. today for all of your Ice Melter needs.

32 Cherry Blossom Road,

Cambridge, ON, N3H 4R7.

Phone: 1-800-434-8248; Fax: 1-877-434-8250.

Email: info@kissner.com

Website: www.ice-beeter.com